Ressourcen/Standard-Blechdicke

Standard-Blechdicke

Umfassende Gauge-zu-Dicke-Referenz für alle gängigen Blecharten.

Gauge-zu-Dicke nach Material

Blech-Gauges variieren je nach Materialtyp.

Cold Rolled (SPCC, SPCD, SPCE), Hot Rolled (SS400, Q235), Galvanized (SGCC)

Gauge	Dicke	Typische Anwendungen
10	3.571 mm	Heavy structural brackets, chassis
12	2.769 mm	Automotive panels, mounting plates
14	1.984 mm	General sheet metal enclosures
16	1.587 mm	Sheet metal boxes, standard brackets
18	1.270 mm	Electronics enclosures, thin brackets
20	0.953 mm	Lightweight panels, covers
22	0.792 mm	Thin shields, clips
24	0.635 mm	Spring clips, shims
26	0.478 mm	Very thin spring components

304, 304L, 316L, 301, 430

Gauge	Dicke	Typische Anwendungen
12	2.769 mm	Food processing equipment
14	1.984 mm	Chemical tanks, marine hardware
16	1.587 mm	Medical device enclosures
18	1.270 mm	Restaurant equipment, sinks
20	0.953 mm	Decorative panels, trim
22	0.792 mm	Thin enclosures, food trays
24	0.635 mm	Shims, thin covers
26	0.478 mm	Spring components

5052, 6061, 3003, 1100

Gauge	Dicke	Typische Anwendungen
10	3.251 mm	Structural frames, heat sinks
12	2.642 mm	Automotive body panels
14	1.854 mm	Electronics front panels
16	1.290 mm	Enclosure covers, signage
18	1.016 mm	Light enclosures, decorative panels
20	0.813 mm	Nameplates, thin covers
22	0.643 mm	Foil-thickness applications

C110 (ETP), C122 (DHP), Brass C260, C268

Gauge	Dicke	Typische Anwendungen
12	2.769 mm	Bus bars, heavy electrical contacts
14	1.984 mm	Electrical panels, grounding plates
16	1.295 mm	RF shields, heat exchangers
18	1.024 mm	EMI gaskets, thin contacts
20	0.813 mm	Flexible connectors, decorative trim
22	0.643 mm	Thin EMI shielding

Für Projekte mit metrischer Dickenangabe.

Dicke	Verfügbar in	Typische Anwendungen
0.5 mm	Steel, Stainless	Very thin shims, spacers
0.8 mm	Steel, Stainless, Aluminum	Thin sheet metal covers
1.0 mm	All materials	Standard thin enclosures, brackets
1.2 mm	All materials	General sheet metal parts
1.5 mm	All materials	Structural brackets, panels
2.0 mm	All materials	Heavy-duty enclosures, frames
2.5 mm	All materials	Mounting plates, structural parts
3.0 mm	All materials	Heavy structural components
4.0 mm	Steel, Stainless, Aluminum	Thick structural parts
5.0 mm	Steel, Stainless	Very thick structural parts
6.0 mm	Steel, Stainless	Maximum standard sheet thickness